Question: Where Can I Find An Anti Sway Hitch In San Marcos?

How do I choose an anti sway hitch?

In order to choose the proper sway control/weight distribution system, you’ll need to first determine the fully loaded and ready to tow tongue weight of your trailer. To that figure, add the weight of any gear stowed in the cargo area of the SUV or truck bed behind the rear axle.

Do anti sway hitches work?

Anti-sway bars designed for a trailer’s hitch and tongue also work similarly. They help reduce the vehicle’s side-to-side motion by bracing the weight of the vehicle’s axle against the chassis. The anti-sway bars distribute the recreational vehicle’s weight evenly.

Does a weight distribution hitch reduce sway?

Weight distribution hitches offer additional features to help with sway control. Better distribution of weight reduces the up-and-down motion of a trailer, while sway control addresses the side-to-side motion. Elements like passing cars and wind can lead to your trailer swaying back and forth.

Do you need a sway bar with a weight distribution hitch?

Most weight distribution hitches that use chains to hold the steel arms up instead of tabs do require a sway control bar in order to be effective against sway. There has to be the friction aspect in order to keep the trailer centered behind your tow vehicle.

Can you use sway control without weight distribution?

Can Sway Control be Used on a Trailer without Using Weight Distribution. Expert Reply: Yes, you can use the Reese Friction Sway control part # 83660 without a weight distribution system.

Do I need a sway hitch?

Sway control is not absolutely necessary for towing but is a factor that needs to be addressed if the trailer is unstable behind the vehicle. Active sway control is more consistent than the friction type and is built into a weight distribution system for the best towing performance and safety.

How does Blue Ox prevent sway?

SwayPro by Blue Ox is a weight distributing hitch that prevents trailer sway. SwayPro relies on tension to keep its spring bars taut and the brackets ensure that pressure from the spring bars will keep the trailer in line with your towing vehicle.

Do I need 2 sway control bars?

Basically, one friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer’s GTW is between 6,000 lbs and 10,000 lbs, you will need two sway-control units, one on each side of the trailer. You will also want to use two units if your trailer is 26 feet or longer.

Why does my trailer sway when empty?

Trailer sway can be caused by gusts of wind, or the passing of big rigs, but can also be caused by a multitude of things that you can fix yourself. 1. Not enough tongue weight–10 to 12 percent of the trailer’s weight must be on the tongue (where it hitches to your vehicle).

Can too much tongue weight cause trailer sway?

When you have less than 10% tongue weight, trailer sway (or fishtailing) will most likely occur, especially when the vehicle is traveling fast. Too much tongue weight could overload the rear tires of the towing vehicle, pushing the rear end of the vehicle around.

Is a weight distribution hitch worth it?

A Weight-Distributing Hitch Is Necessary For Safety Simple, it improves safety. With the weight-distributing hitch properly set up, your load is evenly distributed over the axles on the trailer which gives you more stability and control. It also gives your tow vehicle and trailer a more level ride.

Are trailer sway bars universal?

Expert Reply: All weight distribution system parts, except for the shank component that fits into your hitch, are proprietary and brand-specific. Select bars based on the brand of system and the trailer’s fully-loaded tongue weight.

Can I tow more with a weight distribution hitch?

Well, our technical answer is no, a weight distribution hitch will not actually increase the towing capacity of your vehicle and ensuring that you stay within your manufacturer’s towing capacity is incredibly important for your safety and other drivers on the road.